VoltaicPlasma – Areton LTD Familiarize with the use of electrical arc

Familiarize with the use of electrical arc

[:en]

 

Since the use of electrical arcs sometimes seems quite daunting at the very beginning, this video will guide you through the basics in the operation of Voltaic arc for aesthetic applications. So the main purpose of the experiments you are about to watch is for you to learn the basic principles, so that, with enough practice, you will gain the confidence you require to then start to apply these basic principles for aesthetic purposes.

 

 

How to familiarize with the operation and immediate effects of AC electrical arc generators for aesthetic purposes.

Since the use of electrical arcs sometimes seems quite daunting at the very beginning, this video will guide you through the basics in the operation of Voltaic arc for aesthetic applications. So the main purpose of the experiments you are about to watch is for you to learn the basic principles, so that, with enough practice, you will gain the confidence you require to then start to apply these basic principles for aesthetic purposes. For convenience, the test subjects are: chicken wings, beef steaks and chicken legs, found at any local butcher.

As you will see in this video the carbonisation effects of AC electrical arcing (or also referred to as plasma) are dependent on three main factors:

→ How long the arc has been applied for at any point

→ The power output of the specific device you are using

→ When the voltaic arc is applied in spray mode, the speed of movement of the electrode while the arc takes place.

In this video we will show you the basics of the "spot operation" and the "Spray operation". These two modalities of operation are the two fundamental ways of using, voltaic arc for aesthetic purposes.

For the purposes of the type of device we are using in this demonstration, and ease of operation, if you are right-handed, grab the device as if it is a large pen in this way. This way if you are left-handed.

Position the bottom of your palm on a stable hard surface, be it the forehead of your client or any other hard and stable surface available on your client's body. This will allow you the maximum degree of control of operation by simply moving your wrist in this way. Often, during the first attempt on using an electrical arc generator, people tend to touch the skin (or surface) with the tip of the electrode. As you can see, at very low power, this has no or very little effect on the test meat or the skin. The best way to practice and learn how to generate the arc with this particular device is to increase the power setting of the device and slowly moving the tip of the electrode closer to the surface until the arc takes place. This exercise will help you familiarise with the way voltaic arcs are initiated.

With this portable device, operated at minimum power, there is very little effect if the tip of the electrode touches the working surface or skin. Generally, in order to generate the arc, the electrode has to be kept at a minimum distance from the skin before the arc takes place. With this battery operated device, when set at very low power and the electrode touches the skin or any particular surface, the arc extinguishes and there will be little effects on the skin or the soft tissue (ie mole or benign skin lesion).

For the sake of this exercise, set the equipment power setting at a high enough level so that it is easy for you to generate the arc. Then slowly decrease the distance between the tip of the electrode and the surface. While you are slowly decreasing the distance, at a certain point the spark will take place (see the Paschen Law). In order to extinguish the arc simply increase the distance again. You will notice that the higher the power setting of the device the wider the minimum distance required to generate the arc, conversely the lower the power setting the closer the tip of the electrode needs to be in order to start generating the spark.

The following experiment is meant for you to understand why (with this particular portable device) it is recommended to place your other hand on the client's body while you are applying the AC voltaic arc. With this particular battery-powered device, in this experiment, set the output power at maximum level. Start trying to generate the arc but keep the other hand away from the meat. Now as the arc is generated touch the meat with the other hand. Notice how the arc increases in power as you touch the meat with the other hand, conversely the power is much lower when you do not touch the meat with the other hand. This is because when  you touch the meat with the other hand the high frequency current has an extra low resistance path to earth which decreases the overall resistance it encounters therefore increasing the power of the arc and hence the carbonisation effects.

This mode of operation is mainly used for skin tightening for aesthetic purposes.

Now that we have practiced the fundamental exercise which allows to generate voltaic arcs, we can start practicing the simplest of the methods used in aesthetics. The "spot operation". This type of operation is normally used for skin tightening. Please note that other methods are also suitable for the same applications, however, the spot operation is generally very effective and easy to use for skin tightening purposes. Because this is only an exercise, in order to familiarize with this technique set the equipment at any given power level which allows you ease of operation. In this video we have used the highest possible power setting to demonstrate the principle. When you will be applying the "spot mode" or "spot operation" for aesthetic purposes, the power levels will generally be far lower.

First of all apply very short bursts in different areas as shown here. Stop and look at the effects on the chicken skin. As you will see, the effects on the chicken skin are hardly noticeable.

Then move to another area and apply the arc for approximately one second, two seconds, three seconds, six seconds and finally ten seconds. Observe the effects. So now as you can see, the longer you keep the arc on, the more the carbonation effects at each spot. So the longer the arc is applied the larger and deeper the effects of the voltaic arc.  So with this exercise we have learned how the carbonation or ablation effects are directly dependent on the duration of the exposure to the arc.

This mode of operation is preferred in aesthetics for:

→ Thermabrasion, for tattoo removal

→ Brown and age spots removal

→ Mild thermapeeling for localised skin tightening

→ Benign moles and Benign skin lesions removal and more

For ease of this exercise, the first time you practice the spray mode operation, set the equipment at maximum power and as soon as the spark is generated while keeping the electrode at constant distance from the surface of the chicken skin (or meat) make a sweeping movement while keeping the arc on. The power will be set high only for this exercise to allow you ease of practice. As you gain confidence at high power levels, then practice at lower power levels, down to the minimum setting. Normally the power levels used for aesthetic treatments, with exception for mole removal, by using voltaic arc are very low.

In this last exercise you will see  that by increasing or decreasing the speed of the sweeping movement  the carbonisation effects vary, even if the power setting of the equipment remains unchanged. What you will notice, is that the higher your sweeping speed, the more superficial the carbonisation effects, whereas as the sweeping speed decreases the carbonisation effects penetrate deeper into the skin of the chicken or meat surface.

In order to later move to utilising voltaic arcs for aesthetic applications, practice on your own by using all the different power levels  and spend some time practicing and having fun drawing whatever you wish on the meat.

As you have seen in this video the effects produced by the electric arc are directly related to the way the equipment is used and the arc applied. In aesthetic treatments, the final results will be dependent on the way you perform each procedure. Therefore, if you purchased a voltaic arc generator for aesthetic purposes, the best advice is to start practicing as shown in this video. Practice makes it perfect and there is nothing called as too much practice. So repeat all these exercises on your own and have fun.

[:es]

 

Dado que el uso de arcos eléctricos a veces parece bastante desalentador desde el principio, este video lo guiará a través de los conceptos básicos del funcionamiento del arco voltaico para aplicaciones estéticas. Por lo tanto, el propósito principal de los experimentos que está a punto de observar es que aprenda los principios básicos, de modo que, con la práctica suficiente, gane la confianza que necesita para comenzar a aplicar estos principios básicos con fines estéticos.

 

 

Cómo familiarizarse con el funcionamiento y los efectos inmediatos de los generadores de arco eléctrico de CA para fines estéticos

Dado que el uso de arcos eléctricos a veces parece bastante desalentador desde el principio, este video lo guiará a través de los conceptos básicos del funcionamiento del arco voltaico para aplicaciones estéticas. Por lo tanto, el propósito principal de los experimentos que está a punto de observar es que aprenda los principios básicos, de modo que, con la práctica suficiente, gane la confianza que necesita para comenzar a aplicar estos principios básicos con fines estéticos. Para mayor comodidad, los sujetos de prueba son: alitas de pollo, filetes de res y patas de gallo, que se encuentran en cualquier carnicero local.

Como verá en este video, los efectos de carbonización del arco eléctrico de CA (o también denominado plasma) dependen de tres factores principales:

→ Cuánto tiempo se ha aplicado el arco en cualquier punto

La potencia de salida del dispositivo específico que está utilizando

→ Cuando el arco voltaico se aplica en modo de barrido (spray), la velocidad de movimiento del electrodo mientras tiene lugar el arco.

En este video, le mostraremos los conceptos básicos de la "operación de spot" y la "operación de barrido (Spray)". Estas dos modalidades de operación son las dos formas fundamentales de utilizar el arco voltaico con fines estéticos.

Para los propósitos del tipo de dispositivo que usamos en esta demostración, y la facilidad de operación, si usted es diestro, agarre el dispositivo como si fuera una pluma (esfero) grande de esta manera. De esta manera si eres zurdo.

Coloque la parte inferior de su palma sobre una superficie dura estable, ya sea la frente de su cliente o cualquier otra superficie dura y estable disponible en el cuerpo de su cliente. Esto le permitirá el máximo grado de control de la operación simplemente moviendo su muñeca de esta manera. A menudo, durante el primer intento de usar un generador de arco eléctrico, las personas tienden a tocar la piel (o la superficie) con la punta del electrodo. Como puede ver, a muy baja potencia, esto no tiene ningún efecto en la carne o en la piel. La mejor manera de practicar y aprender cómo generar el arco con este dispositivo en particular es aumentar la configuración de energía del dispositivo y mover lentamente la punta del electrodo más cerca de la superficie hasta que se produzca el arco. Este ejercicio te ayudará a familiarizarte con la manera en que se inician los arcos voltaicos.

Con este dispositivo portátil, operado a una potencia mínima, hay muy poco efecto si la punta del electrodo toca la superficie de trabajo o la piel. En general, para generar el arco, el electrodo debe mantenerse a una distancia mínima de la piel antes de que tenga lugar el arco. Con este dispositivo que funciona con batería, cuando se configura a muy baja potencia y el electrodo toca la piel o cualquier superficie en particular, el arco se extingue y habrá pocos efectos en la piel o el tejido blando (es decir, lunar o lesión cutánea benigna)

Por el bien de este ejercicio, establezca la configuración de potencia del equipo a un nivel lo suficientemente alto para que le sea fácil generar el arco. Luego, disminuya lentamente la distancia entre la punta del electrodo y la superficie. Mientras está disminuyendo lentamente la distancia, en cierto punto se producirá una chispa (consulte la Ley Paschen). Para extinguir el arco simplemente aumentar la distancia nuevamente. Notará que cuanto más alta sea la configuración de energía del dispositivo, más ancha será la distancia mínima requerida para generar el arco, a la inversa, mientras más baja sea la configuración de energía, más cerca deberá estar la punta del electrodo para comenzar a generar la chispa.

El siguiente experimento es para que entienda el por qué (con este dispositivo portátil en particular) se recomienda colocar tu otra mano en el cuerpo del cliente mientras aplica el arco voltaico AC. Con este dispositivo particular alimentado por batería, en este experimento, establezca la potencia de salida en el nivel máximo. Comience a intentar generar el arco, pero mantenga la otra mano lejos de la carne. Ahora, a medida que se genera el arco, toca la carne con la otra mano. Observe cómo el arco aumenta en potencia cuando toca la carne con la otra mano, a la inversa, la potencia es mucho menor cuando no toca la carne con la otra mano. Esto se debe a que cuando toca la carne con la otra mano, la corriente de alta frecuencia tiene una ruta de resistencia a la tierra extremadamente baja que disminuye la resistencia general que encuentra, lo que aumenta la potencia del arco y, por lo tanto, los efectos de la carbonización.

Este modo de operación se utiliza principalmente para el estiramiento de la piel con fines estéticos.

Ahora que hemos practicado el ejercicio fundamental que permite generar arcos voltaicos, podemos empezar a practicar el más simple de los métodos utilizados en estética. El "la operación spot". Este tipo de operación se utiliza normalmente para el estiramiento de la piel. Tenga en cuenta que otros métodos también son adecuados para las mismas aplicaciones, sin embargo, la operación spot es generalmente muy efectiva y fácil de usar para propósitos de estiramiento de la piel. Debido a que esto es solo un ejercicio, para familiarizarse con esta técnica, configure el equipo a cualquier nivel de potencia que le permita una fácil operación. En este video, hemos utilizado la configuración de potencia más alta posible para demostrar el principio. Cuando aplique el "modo de punto" o "operación de punto" con fines estéticos, los niveles de potencia generalmente serán mucho más bajos

En primer lugar, aplique ráfagas muy cortas en diferentes áreas como se muestra aquí. Deténgase y observe los efectos en la piel del pollo. Como verás, los efectos sobre la piel del pollo apenas se notan.

Luego muévase a otra área y aplique el arco durante aproximadamente un segundo, dos segundos, tres segundos, seis segundos y finalmente diez segundos. Observa los efectos. Así que ahora, como puede ver, cuanto más tiempo mantenga el arco, más efectos de carbonatación tendrá en cada punto. Por lo tanto, cuanto más tiempo se aplique el arco, mayores y más profundos serán los efectos del arco voltaico. Así que con este ejercicio hemos aprendido cómo los efectos de la carbonatación o la ablación dependen directamente de la duración de la exposición al arco.

Este modo de operación es preferido en estética para:

→ Termabrasión, para la eliminación de tatuajes.

→ Eliminación de manchas marrones y de la edad

→ → Termapeeling suave para estiramiento de piel localizada

→ Lunares benignos y eliminación de lesiones benignas de la piel y más

Para facilitar este ejercicio, la primera vez que practique el modo de barrido (spray), configure el equipo a la máxima potencia y, tan pronto como se genere la chispa, mantenga el electrodo a una distancia constante de la superficie de la piel (o carne) del pollo. Movimiento de barrido manteniendo el arco. El poder se establecerá alto solo para este ejercicio para permitirle practicar con facilidad. A medida que gane confianza a niveles de potencia altos, practique con niveles de potencia más bajos, hasta el ajuste mínimo. Normalmente, los niveles de potencia utilizados para los tratamientos estéticos, con la excepción de la remoción de lunares, mediante el uso de arco voltaico son muy bajos.

En este último ejercicio, verá que al aumentar o disminuir la velocidad del movimiento de barrido, los efectos de la carbonización varían, incluso si la configuración de potencia del equipo permanece sin cambios. Lo que notará es que cuanto mayor sea su velocidad de barrido, más superficiales serán los efectos de carbonización, mientras que a medida que la velocidad de barrido disminuye, los efectos de carbonización penetran más profundamente en la piel de la superficie de pollo o carne.

Con el fin de pasar luego a utilizar arcos voltaicos para aplicaciones estéticas, practique por su cuenta utilizando los diferentes niveles de potencia y pase un tiempo practicando y divirtiéndose dibujando lo que desee sobre la carne.

Como ha visto en este video, los efectos producidos por el arco eléctrico están directamente relacionados con la forma en que se usa el equipo y el arco aplicado. En los tratamientos estéticos, los resultados finales dependerán de la forma en que realice cada procedimiento. Por lo tanto, si compró un generador de arco voltaico con fines estéticos, el mejor consejo es comenzar a practicar como se muestra en este video. La práctica lo hace perfecto y no hay nada llamado como demasiada práctica. Así que repite todos estos ejercicios por tu cuenta y diviértete.

[:]