The video shown below details how the procedure was carried out. Showing:
You can watch the video in its entirety so that you appreciate the content of this page. It will not last more than 10 minutes.
The intensity used in this particular treatment is relatively high. The configuration of the device varied between 10 and 12. Also, as you can see, the duration of the spots is relatively short (from a quarter of a second to a half second). then, the distance between the spots is 1 to 2 mm maximum. The spots were applied as usual between the lines of expression (wrinkles) and not inside them. In this case, the aesthetic practitioner was (Andreas Russo MD of Areton Ltd in 2018) he made sure to cover the entire area to achieve optimal results within the single session. Keep in mind that the treatment can be repeated and lead to an appreciable improvement.
The anesthetic product used was a 10% lidocaine cream. This anesthetic was applied using occlusion for 45 minutes. The area was not completely numb and, therefore, special attention was paid to the pain experienced by the client.
The use of a stronger professional topical anesthetic product is always recommended whenever possible. Topical anesthetic products containing: Lidocaine 20%, Prilocaine 5%, Tetracaine 5%, as they are very effective in numbing the area even without occlusion and the client generally does not experience any significant pain or discomfort during the treatment. Those who underwent this type of aesthetic procedure using this type of numbness, reported that they still feel the zapping of the electric arc explosions, however, they do not feel pain or discomfort during the treatment.
It is important that the client is comfortable during the aesthetic treatment. It is worth bearing in mind that it is still possible to carry out most of these types of treatment without any kind of numbness, however, this can make the treatment experience unpleasant. Also, in case the client experiences a high level of discomfort, the treatment may take much longer.
It is advisable to use the strongest professional anesthetic product possible, to allow:
* Ease and speed of operation.
* Allow the treatment to be carried out to its full potential. In case the client experiences too much discomfort or pain, proceed to the intensity that he considers appropriate. For example, if the client is particularly sensitive and the product that numbs him is not as effective, it is possible that certain levels of power can not be realized in a practical way. The lower power levels may be tolerable, while the higher power levels you can use instead can be painful.
Therefore, it is very important to make sure that the client does not experience any pain or discomfort; This is achieved through the use of anesthetic products in the proper manner.